EIGRP TUGAS 5 JARKOM 3

Router 0

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.10.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#int ser2/0

Router(config-if)#ip add 172.16.20.1 255.255.255.0

Router(config-if)#cl

Router(config-if)#clock ra

Router(config-if)#clock rate 72000

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#exit

Router(config)#router ei

Router(config)#router eigrp 10

Router(config-router)#net 172.16.20.0 0.0.0.255

Router(config-router)#net 172.16.10.0 0.0.0.255

Router(config-router)#exit

Router 1

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.30.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int ser2/0

Router(config-if)#ip add 172.16.20.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config)#route

Router(config)#router ei

Router(config)#router eigrp 10

Router(config-router)#net 172.16.20.0 0.0.0.255

Router(config-router)#

%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.20.1 (Serial2/0) is up: new adjacency

Router(config-router)#net 172.16.20.0 0.0.0.255

Router(config-router)#net 172.16.10.0 0.0.0.255

ISI/ELEMEN KOTAK